Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Cutting Board (http://volksrods.com/forum/forumdisplay.php?f=5)
-   -   Choosing an extender (http://volksrods.com/forum/showthread.php?t=34070)

Jackalope July 24th, 2011 05:31 PM

Choosing an extender
 
Hey all,

After looking through several builds ive noticed there are several diferent extender designs out there.

What is the most common extender to buy or make as far as length and drop?

im running a stock beam and may do a cut and turn.

Anyone have any plans?

thanks

Dbug41 July 25th, 2011 08:36 PM

Re: Choosing an extender
 
Quote:

Originally Posted by Jackalope (Post 516972)
Hey all,

After looking through several builds ive noticed there are several diferent extender designs out there.

What is the most common extender to buy or make as far as length and drop?

im running a stock beam and may do a cut and turn.

Anyone have any plans?

thanks

8" 2.5" drop far and away the most common
yes I have plans :funny:
no your not getting them:wink:

Al Low Ha July 25th, 2011 09:18 PM

Re: Choosing an extender
 
there 'were' a few fabricators out there in the beginning....they have fallen to the wayside! Now there's a few more. "I" have delt with Doug personally..outstanding guy and the only "tested" beam extenders on the market EVER! The choice is super easy...buy on from Doug(& a frame head brace!) or just build it your self....(& cross your fingers)
Aloha

XrayDean July 26th, 2011 12:43 AM

Re: Choosing an extender
 
Quote:

Originally Posted by Al Low Ha (Post 517083)
there 'were' a few fabricators out there in the beginning....they have fallen to the wayside! Now there's a few more. "I" have delt with Doug personally..outstanding guy and the only "tested" beam extenders on the market EVER! The choice is super easy...buy one from Doug(& a frame head brace!) or just build it your self....(& cross your fingers)
Aloha

Well said.


All times are GMT -8. The time now is 12:21 PM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2013 Three Pugs Design - Cut Weld Drive Forums