Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   Members Intros and Project Updates! (http://volksrods.com/forum/forumdisplay.php?f=9)
-   -   1963 notchback (http://volksrods.com/forum/showthread.php?t=14150)

SquareOnAir December 19th, 2006 09:51 AM

1963 notchback
 
i picked up this 1963 type3 notchback last year
http://img.photobucket.com/albums/v6...k/DSCF0814.jpg
http://img.photobucket.com/albums/v6...k/DSCF0816.jpg
http://img.photobucket.com/albums/v6...k/DSCF0817.jpg

hauld it home and cleaned the car up
http://img.photobucket.com/albums/v6...k/DSCF0839.jpg
http://img.photobucket.com/albums/v6...k/DSCF0846.jpg
http://img.photobucket.com/albums/v6...k/DSCF0861.jpg

from setting for so long the floor pans was gone
http://img.photobucket.com/albums/v6...s/DSCF0654.jpg
http://img.photobucket.com/albums/v6...s/DSCF0655.jpg
http://img.photobucket.com/albums/v6...s/DSCF0670.jpg
http://img.photobucket.com/albums/v6...s/DSCF0681.jpg


so i fabbicated my own to work since there is none to buy
http://img.photobucket.com/albums/v6...d/DSCF0364.jpg
http://img.photobucket.com/albums/v6...d/DSCF0374.jpg
http://img.photobucket.com/albums/v6...d/DSCF0380.jpg
http://img.photobucket.com/albums/v6...d/DSCF0383.jpg

sanded the whole car down to metal
http://img.photobucket.com/albums/v6...d/DSCF0751.jpg
http://img.photobucket.com/albums/v6...d/DSCF0754.jpg
http://img.photobucket.com/albums/v6...d/DSCF0758.jpg
http://img.photobucket.com/albums/v6...d/DSCF0759.jpg

not bad of a car for setting for so long

SquareOnAir December 19th, 2006 09:52 AM

Re: 1963 notchback
 
the top of the fenders was a bit rusted but i never could find any good fenders of that year so i had some later modle fenders so i cut out the head light buckets from them that are way different shape than te older ones
but i think i did a good job on replacing them and making them work
http://img.photobucket.com/albums/v6...ets/cutout.jpg
http://img.photobucket.com/albums/v6...s/DSCF0369.jpg
http://img.photobucket.com/albums/v6...s/DSCF0388.jpg
http://img.photobucket.com/albums/v6...s/DSCF0390.jpg
http://img.photobucket.com/albums/v6...s/DSCF0423.jpg
http://img.photobucket.com/albums/v6...s/DSCF0494.jpg
http://img.photobucket.com/albums/v6...s/DSCF0503.jpg
http://img.photobucket.com/albums/v6...s/newpics2.jpg
http://img.photobucket.com/albums/v6...s/weldedin.jpg

motor turned over and spit thru the carbs but did not start so i took the valve covers off to notice it had bent push rods and stuck valves..so i bought a pair of single port heads new and installed them and did some clean up in the motor tins
http://img.photobucket.com/albums/v6...r/DSCF1015.jpg
http://img.photobucket.com/albums/v6...r/DSCF1019.jpg
http://img.photobucket.com/albums/v6...r/DSCF1020.jpg
http://img.photobucket.com/albums/v6...r/DSCF1076.jpg
http://img.photobucket.com/albums/v6...r/DSCF1078.jpg

started to take the brakes apart and i find out that this brake set up was only made 3 years and is a euro model only set up
master cylinder is 250
wheel cylinders are 95 each and each wheel takes two
and the front drums are obsolite
http://img.photobucket.com/albums/v6...s/DSCF1286.jpg
http://img.photobucket.com/albums/v6...s/DSCF1295.jpg

thats when the stock daily driver notch took its twist
no way i can see putting 1500 in brakes that i dont know how long they will last nor do i know if i can get more parts for it when i do...so i fabbicated 5 inch narrowed front type1 based l/p front end with a cb performance drop spendel
http://img.photobucket.com/albums/v6...t/newbeam2.jpg
http://img.photobucket.com/albums/v6...t/painted1.jpg
http://img.photobucket.com/albums/v6...t/DSCF0118.jpg
http://img.photobucket.com/albums/v6...t/DSCF0123.jpg
http://img.photobucket.com/albums/v6...t/painted2.jpg

this is corrent photos as of last weekend when the front end went together this is of the car lowered all the way with the short axles in the rear and 2 notches
http://img.photobucket.com/albums/v6...r/DSCF0180.jpg
http://img.photobucket.com/albums/v6...r/DSCF0192.jpg
http://img.photobucket.com/albums/v6...r/DSCF0193.jpg
http://img.photobucket.com/albums/v6...r/DSCF0195.jpg
http://img.photobucket.com/albums/v6...r/DSCF0196.jpg

and this is it raised all the way up and 2 notches in the rear
http://img.photobucket.com/albums/v6...r/DSCF0206.jpg
http://img.photobucket.com/albums/v6...r/DSCF0208.jpg
http://img.photobucket.com/albums/v6...r/DSCF0210.jpg

SquareOnAir December 24th, 2006 03:57 PM

Re: 1963 notchback
 
http://img.photobucket.com/albums/v6...d/DSCF0236.jpg
http://img.photobucket.com/albums/v6...d/DSCF0237.jpg
http://img.photobucket.com/albums/v6...d/DSCF0238.jpg
http://img.photobucket.com/albums/v6...d/DSCF0241.jpg
http://img.photobucket.com/albums/v6...d/DSCF0242.jpg
http://img.photobucket.com/albums/v6...d/DSCF0243.jpg

SquareOnAir March 20th, 2007 08:10 AM

Re: 1963 notchback
 
got the seats done and awaiting for install
http://img.photobucket.com/albums/v6...s/DSCF0777.jpg
http://img.photobucket.com/albums/v6...s/DSCF0778.jpg
http://img.photobucket.com/albums/v6...s/DSCF0779.jpg
http://img.photobucket.com/albums/v6...s/DSCF0780.jpg
http://img.photobucket.com/albums/v6...s/DSCF0832.jpg
http://img.photobucket.com/albums/v6...s/DSCF0833.jpg
http://img.photobucket.com/albums/v6...s/DSCF0834.jpg
http://img.photobucket.com/albums/v6...s/DSCF0835.jpg

SquareOnAir March 20th, 2007 08:12 AM

Re: 1963 notchback
 
got the frontend all shaved and a roll pan made out back
http://img.photobucket.com/albums/v6...s/DSCF0806.jpg
http://img.photobucket.com/albums/v6...s/DSCF0807.jpg
http://img.photobucket.com/albums/v6...s/DSCF0808.jpg
http://img.photobucket.com/albums/v6...DSCF0809-1.jpg
http://img.photobucket.com/albums/v6...DSCF0810-1.jpg
http://img.photobucket.com/albums/v6...s/DSCF0811.jpg
http://img.photobucket.com/albums/v6...s/DSCF0812.jpg
http://img.photobucket.com/albums/v6...s/DSCF0813.jpg
http://img.photobucket.com/albums/v6...s/DSCF0814.jpg

SquareOnAir May 31st, 2007 07:27 PM

Re: 1963 notchback
 
http://img.photobucket.com/albums/v6...paint/rear.jpg
http://img.photobucket.com/albums/v6...aint/side1.jpg

SquareOnAir June 11th, 2010 11:31 AM

Re: 1963 notchback
 
been awile since i have updated...

http://img.photobucket.com/albums/v6...d/DSCF0807.jpg
http://img.photobucket.com/albums/v6...d/DSCF0812.jpg
http://img.photobucket.com/albums/v6...d/DSCF0814.jpg
http://img.photobucket.com/albums/v6...d/DSCF0826.jpg
http://img.photobucket.com/albums/v6...d/DSCF0827.jpg
http://img.photobucket.com/albums/v6...d/DSCF0828.jpg


All times are GMT -8. The time now is 12:49 PM.

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2020 Three Pugs Design - Cut Weld Drive Forums