Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Cutting Board (http://volksrods.com/forum/forumdisplay.php?f=5)
-   -   Ratty rear safari (http://volksrods.com/forum/showthread.php?t=38789)

f4u5t May 10th, 2021 09:57 AM

Ratty rear safari
 
1 Attachment(s)
I'm making a rear safari for my Ratty Super..
I have the frame pretty close to done and need to come up with a side support, so I can ditch that piece of PVC holding it up now, lol
Anyone got any cool ideas, would like something unique

V8Transporter May 10th, 2021 06:07 PM

Re: Ratty rear safari
 
Unique? Hmm, how ‘bout a pair of helium balloons with hand a painted ‘VW?’

V8Transporter May 13th, 2021 11:38 AM

Re: Ratty rear safari
 
Okay, how about a pair of coil springs maybe 5/8” or so in diameter; eight to ten inches long with a fitting at each end for pivoting. Extended, the springs support the open ‘safari. You push in the springs centers to close. Only problem might be the springs in the way when c folded.
Or, tubing with a pivot at each end that slide together when closed. When extended to open, a clip slides into holes to hold it. More than one ‘hole could allow for more that one opening height. Also serve as a ‘lock.

V8Transporter May 13th, 2021 05:23 PM

Re: Ratty rear safari
 
Another thought is the small lift devices used on the Campways bed cover’s rear hatch on my ‘99 Ranger. These are a STABILUS lift-o-mat. They are small, light and I would guess come in various sizes for different loads.


All times are GMT -8. The time now is 02:31 PM.

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright ©2002 - 2020 Three Pugs Design - Cut Weld Drive Forums