Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   Members Intros and Project Updates! (http://volksrods.com/forum/forumdisplay.php?f=9)
-   -   My 60 bug project (http://volksrods.com/forum/showthread.php?t=8749)

McKustoms October 25th, 2005 05:20 AM

I'm Steve McKinzie (McKustoms). I am 45 years old and live in Portland, OR. I work for the Albertsons Distribution center as a receiving clerk. I like, and used to have a few old hotrods and bugs. Just getting back into it. I bought a 62 ragtop bug to build a v-rod. I wanted it chopped. Later found an already chopped 60 that was an old drag bug and bought that. Sold the 62 rag. Want it to be chopped, dropped, and louvered. Gonna run the old ford wires. Will post a few pics as it comes along. This is what I'm starting with.
http://pic13.picturetrail.com/VOL462.../100409617.jpg
http://pic13.picturetrail.com/VOL462.../116317920.jpg
http://pic13.picturetrail.com/VOL462.../116317927.jpg
http://pic13.picturetrail.com/VOL462.../116317916.jpg

McKustoms October 25th, 2005 05:31 AM

Changing front clip for one with stock dash and fender wells. Putting in new floorboards. Cut the x roll bar from the doors so I can get in easier.
Also making front end extender. 10 1/2 inches long and lowers 2 inches.
http://pic13.picturetrail.com/VOL462.../116317931.jpg
http://pic13.picturetrail.com/VOL462.../116318065.jpg
http://pic13.picturetrail.com/VOL462.../116317912.jpg
http://pic13.picturetrail.com/VOL462.../116318163.jpg
http://pic13.picturetrail.com/VOL462.../116318149.jpg
http://pic13.picturetrail.com/VOL462.../116318091.jpg
http://pic13.picturetrail.com/VOL462.../116318086.jpg

McKustoms October 27th, 2005 01:45 AM

We got the steering box relocated so that it does'nt hit the hood. Also enclosed the front end after trimming. Will still have a hood relese.http://pic13.picturetrail.com/VOL462.../116504307.jpg
http://pic13.picturetrail.com/VOL462.../116504303.jpg

McKustoms October 30th, 2005 02:22 AM

Front end on now..
http://pic13.picturetrail.com/VOL462.../116811201.jpg

McKustoms November 6th, 2005 04:51 PM

http://pic13.picturetrail.com/VOL462.../117911208.jpg
http://pic13.picturetrail.com/VOL462.../117911239.jpg
http://pic13.picturetrail.com/VOL462.../117911271.jpg

McKustoms March 27th, 2006 03:39 AM

Here's a shifter James from the board cut out for me. Got it welded on and ready fro the chromer.
http://pic13.picturetrail.com/VOL462.../135702788.jpg

McKustoms March 31st, 2006 03:26 AM

Was a little too tall, if there is such a thing. So I took out a few inches.
http://pic13.picturetrail.com/VOL462.../136409785.jpg
http://pic13.picturetrail.com/VOL462.../136409786.jpg
http://pic13.picturetrail.com/VOL462.../136409788.jpg

McKustoms June 15th, 2006 02:54 PM

http://pic13.picturetrail.com/VOL462.../156715235.jpg
Paintd the dash, got the wire wheels podercoated, seats mounted. Bought a rebuilt motor. Slowly comming along. Need to get spacers so I can mout the front wheels.

McKustoms August 6th, 2006 08:23 PM

Re: My 60 bug project
 
Got a little more done...http://pic13.picturetrail.com/VOL462.../175167206.jpg

McKustoms August 6th, 2006 08:24 PM

Re: My 60 bug project
 
http://pic13.picturetrail.com/VOL462.../175167182.jpg

McKustoms August 6th, 2006 08:25 PM

Re: My 60 bug project
 
http://pic13.picturetrail.com/VOL462.../175167201.jpg

McKustoms August 6th, 2006 08:27 PM

Re: My 60 bug project
 
http://pic13.picturetrail.com/VOL462.../175167189.jpg

McKustoms February 8th, 2009 02:00 AM

Re: My 60 bug project
 
http://www.mckustoms.com-a.googlepages.com/home

McKustoms April 26th, 2011 04:46 AM

Re: My 60 bug project
 
Well sold the bug a few years back. Just found it again. Thinking about picking it up from the guy.
Here it is now.
https://sites.google.com/a/mckustoms...=163&width=400

McKustoms April 26th, 2011 04:50 AM

Re: My 60 bug project
 
https://sites.google.com/a/mckustoms...=300&width=400

McKustoms April 27th, 2011 02:47 AM

Re: My 60 bug project
 
https://sites.google.com/a/mckustoms...9a95811003.jpg


All times are GMT -8. The time now is 11:40 AM.

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2020 Three Pugs Design - Cut Weld Drive Forums