Cut-Weld-Drive Forums

Cut-Weld-Drive Forums (http://volksrods.com/forum/index.php)
-   The Cutting Board (http://volksrods.com/forum/forumdisplay.php?f=5)
-   -   Brake system rebuild (http://volksrods.com/forum/showthread.php?t=38604)

Amber 74 October 16th, 2017 11:11 AM

Brake system rebuild
 
Getting ready to rebuild the drum brake system on my 74 Super.Plans are for new rubber brake hoses,new shoes ,new wheel cylinders,turned drums ,flushed lines with new brake fluid and a new master cylinder if needed. Will NAPA parts be OK or should I spend the extra $ and go with OEM if possible ?

vinayak October 16th, 2017 12:04 PM

Re: Brake system rebuild
 
I went with Autozone stuff. Worked good just get good fluid.

marnat3 October 16th, 2017 01:42 PM

Re: Brake system rebuild
 
Autozone X2

V8Transporter October 16th, 2017 02:23 PM

Re: Brake system rebuild
 
^x 3 :thumbsup:

rostigbug October 16th, 2017 04:15 PM

Re: Brake system rebuild
 
Getting everything all new is probably a waste of money & work.
just replace the worn outparts
the important trick with these old school drum brakes is knowing how to properly adjust them.
IDK the superbeetle. My '61 has separate adjusters for each shoe.
8 shoes + 8 adjusters
it takes real time and patience to get them all adjusted properly
once the system is bled & adjusted these brakes are great
BTW I bought the cheap chineese drums and shoes at appletree & they are fine


All times are GMT -8. The time now is 01:07 PM.

Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2013 Three Pugs Design - Cut Weld Drive Forums