View Single Post
Old September 1st, 2013, 08:16 PM   #12
tattooed_pariah
Site Supporter
 
tattooed_pariah's Avatar
 
Join Date: May 2006
Location: El Cajon, California
Posts: 3,948
Member Photo Albums
Default Re: Effigy's history

Well, finally got off my ass and back into the garage tonight..

Cleaned off as much of the ultimate grey gasket maker as I could, then put a coat of Kuril on and put the case back together.

everything rotates smoothly, so I went ahead and put the pistons and cylinders back in, push rod tubes (split upwards) and heads torqued down.

it resembles an engine again! :P

I think all that's left now is to install the alternator stand, put the alternator in the new shroud, put all the tins on, the flywheel, hold the engine up in position so I can figure out where I want to install nut serts to mount the oil breather box and 6AL box..
__________________
-pariah

"I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr.
===========
Feel free to stare and admire,
but kindly tell me if it's on fire!

1972 VolksRod "Effigy" Build Thread
1986 Honda Shadow VT1100 Work Thread
tattooed_pariah is offline   Reply With Quote