View Single Post
Old November 12th, 2011, 03:51 PM   #22
tattooed_pariah
Site Supporter
 
tattooed_pariah's Avatar
 
Join Date: May 2006
Location: El Cajon, California
Posts: 3,948
Member Photo Albums
Default Re: Cheap or Correct?

Just went out and peeked at it.. this may work out well... Apparently JB Weld does not adhere to craftsman allen wrenches, but the allen wrench worked as a reverse mold and the JB weld might give me something to grab with my allen wrench socket.. gonna give it a full 24 hours of curing, but it might actually work.. :P

I'm thinking I might just use one of the bolts from the cylinder cooling fins to replace this one. Two of the tins are held on with 4 bolts, I'm sure holding one on with 3 won't be that detrimental..
__________________
-pariah

"I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr.
===========
Feel free to stare and admire,
but kindly tell me if it's on fire!

1972 VolksRod "Effigy" Build Thread
1986 Honda Shadow VT1100 Work Thread
tattooed_pariah is offline   Reply With Quote