View Single Post
Old March 24th, 2015, 08:58 PM   #87
tattooed_pariah
Site Supporter
 
tattooed_pariah's Avatar
 
Join Date: May 2006
Location: El Cajon, California
Posts: 3,948
Member Photo Albums
Default Re: Effigy's history

Quote:
Originally Posted by rodderdan View Post
You're not alone I bought this setup for my 66.The flange on the left j-tube was welded on at an angle so it doesn't fit flush to the head.I can't tighten it more or the stud will pull from the head.The only solution is to heat/bend or cut/weld both of which will destroy the ceramic coating that was $100 extra.I now have a permanent exhaust leak.I should have known better than to buy something made by EMPI!!!
well, no offense, but i would expect that from empi.. I bought a stainless steel system made by A-1.. from what I know, they are about the damn top of the food chain for exhausts..

I looked at it again tonight, took the j-pipes off, and tried to mount the header. in order to make this work, I'd have to muscle the shit out of it to get it on, or heat and bend the #2 pipe inwards about a 1/4 to a 1/2 inch.. not exactly the quality I expected for $1200.

especially considering my $200, off the shelf, boxed made in china header I was running fit perfectly..
__________________
-pariah

"I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr.
===========
Feel free to stare and admire,
but kindly tell me if it's on fire!

1972 VolksRod "Effigy" Build Thread
1986 Honda Shadow VT1100 Work Thread
tattooed_pariah is offline   Reply With Quote