View Single Post
Old March 25th, 2015, 06:19 PM   #91
tattooed_pariah
Site Supporter
 
tattooed_pariah's Avatar
 
Join Date: May 2006
Location: El Cajon, California
Posts: 3,948
Member Photo Albums
Default Re: Effigy's history

Quote:
Originally Posted by bigguy View Post
Ratchet strap it but looks like during welding process it moved slightly. Might need to heat and tweak it from the looks of it though.

might try a ratchet strap.. that could work, would just suck to have to do that everytime to get it on and off..

Quote:
Originally Posted by bigguy View Post
Is there three slip joints on that header.
yeah, there are three slip joints, but with how it isn't fitting, it's not a matter of it rotating, the #2 pipe needs to slip in further to the header, or needs to be bent a tiny bit more..

Quote:
Originally Posted by whozawhat View Post
Did they build that system to fit a stroker engine?
I have read they end up being wider.
my engine is normal width, I had an off the shelf merger and it fit perfectly with no adjustments..
__________________
-pariah

"I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr.
===========
Feel free to stare and admire,
but kindly tell me if it's on fire!

1972 VolksRod "Effigy" Build Thread
1986 Honda Shadow VT1100 Work Thread
tattooed_pariah is offline   Reply With Quote