Thread: Type 3 VolksRod
View Single Post
Old April 1st, 2014, 08:09 PM   #1502
jaransonT3
Type 3 Nut
 
jaransonT3's Avatar
 
Join Date: Jan 2005
Location: Dearborn, MI
Posts: 3,304
Default Re: Type 3 VolksRod

Started on the modifications to the front beam for the air ride tonight. Mostly just getting metal out of the way for the control horns and bags and such...





I also tried doing a little turning on the splined stub axle. It is hard stuff, but it did turn down. I need to get it down to a press fit inside the trailing arms.

I will be adding a brace back in to replace the lower tube that I cut away. Don;t want to go to all the trouble to stick with teh heavier Type 3 parts and then compromise the strength of the beam housing.
__________________
Later,
John Jaranson
'66 Square (Sophy)
'69 Square (Panel wanna-be)
'70/'71 Fasty (Jane - the Lead Sled project)

My Home Page
CarArt by John Jaranson
2010 Type 3 Invasion
jaransonT3 is offline   Reply With Quote