Thread: Type 3 VolksRod
View Single Post
Old June 13th, 2005, 07:37 PM   #98
Forum Member
mikeschramm's Avatar
Join Date: Feb 2005
Location: Splitsville
Posts: 597

Jaranson, I have an idea for making your peaks that wouldent involve "too much" work. Go buy a little metal pipe, maybe about 3/8" diameter, and with your cut off wheel split it down the middle. With the split side down take your body hammer and tap both sides in alittle to make it somewhat pointy then weld this section on the top of the fender. Use the grinder to finish off the shape. Im not good at explaining things but it seems easy enough.
mikeschramm is offline   Reply With Quote