View Single Post
Old October 1st, 2013, 03:12 PM   #14
Site Supporter
tattooed_pariah's Avatar
Join Date: May 2006
Location: El Cajon, California
Posts: 3,955
Member Photo Albums
Default Re: Effigy's history

So Saturday after work I had my buddy Tom come over and hang out with me while i did some more work on the bug..

Got the push rods and rocker arm on the 1/2 side.. but while putting the rocker arm on the 3/4 side, I screwed up and tightened one side down before the other was fully seated.. it caused the shoulder on the stud to get screwed up, which made the rocker not want to seat properly, and while trying to remove it to figure out what was binding, I broke the clamp on my bolt together rocker :(

Since that ended forward progress on the block, I decided to do some more work on the new linkage.. got the brackets and wheels installed on both carbs :D


"I never trust a fighting man who doesn't smoke or drink or at least cause a little trouble." -Admiral William Frederick Halsey Jr.
Feel free to stare and admire,
but kindly tell me if it's on fire!

1972 VolksRod "Effigy" Build Thread
1986 Honda Shadow VT1100 Work Thread
tattooed_pariah is online now   Reply With Quote