Re: Front end options revisited
"According to the instructions, since one number is positive and one negative, you ignore the positive & negative value and add the numbers together .4 + 1.3 = 1.8
Next you multiply by by 4 (1.8 x 4 = 7.2)
The left wheel has 7.2 degrees of caster
I next did the right wheel and the numbers came out like this...
Wheel turned out to the 20 degree line positive 1.2
Wheel turned in to the 20 degree line  positive .4
In this case, since both numbers are positive, you subtract the smaller from the larger
1.2  .4 = .8 (next, multiply by 2) .8 x 2 = 1.6
The right wheel has 1.6 degrees of caster
"
One side, the number is multiplied by 2,
the other side it was multiplied by 4.
Does that sound right ?
