Cut-Weld-Drive Forums

Go Back   Cut-Weld-Drive Forums > The VolksRodders Forum > The Tech Bin

The Tech Bin An ARCHIVE of helpful and informative tech posts...


User Information
Your Avatar

Stuff to check out...

Cool stuff you NEED!

Forum Stats
Members: 17,476
Threads: 32,236
Posts: 544,728
Total Online: 497

Newest Member: Hellcat

Latest Threads
- by yimbo
- by JiI

 
Reply
 
Thread Tools Display Modes
Old December 27th, 2008, 05:49 PM   #1
bugdust
Forum Member
 
bugdust's Avatar
 
Join Date: Dec 2002
Location: Middleburg, FL USA
Posts: 8,800
Member Photo Albums
Default Scat bus shifter into bug
Re:: How-to:   

I was just looking in one of the old shifter threads and the question of putting a Scat bus shifter into a bug came up. There was no pics.

There's a couple of ways to put a Scat bus shifter into a late bug (68+). It may be the same for earlier cars as well. I put one in a 69 bug a few years ago. This is all from memory and a few pics so bear with me.

The Scat bus shifter is about 1" longer below the mounting plate than the bug but has a 3/8" spacer (two "horseshoes") tacked on there so it comes out to about 5/8" difference. You could just add a couple spacers under each bolt location or a stack of washers I suppose, but that's not how I did it. I made a 1" spacer.

Here's a pic of the difference after I knocked the spacers off.
Bug on top, bus below

spacers removed


I took a piece of 1" thick flatbar (1x3 maybe, about 6" or so long) and layed out the outline of the bottom of the Scat shifter on it. I cut it to shape, including the center hole. Make the hole bigger than the Scat hole to allow for the shaft angles or bevel the sides.



I cut it out by hand with a torch.

Then, I just drilled some slots into the plate to allow some adjustment and bolted it up with longer bolts.




I sold the car with the shifter & spacer in it so I can't get any actual dimensions for you. I still have the paper template somewhere.
__________________
my photobucket page

Quote:
No pics, but oh well, if you really, really need to see metal removed, turn off your computer and work on your car... ~ Ray-Dean
bugdust is offline   Reply With Quote
Old December 27th, 2008, 06:18 PM   #2
jkien65
Forum Member
 
jkien65's Avatar
 
Join Date: Aug 2006
Location: Benton City, Wa
Posts: 3,159
Default Re: Scat bus shifter into bug

Nice tech. Needs to be in the tech bin.
__________________
You can't make the same mistake twice. The second time you make it, it's no longer a mistake. It's a choice.
jkien65 is offline   Reply With Quote
Reply

Tags
scat shifter

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 06:53 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2013 Three Pugs Design - Cut Weld Drive Forums