torque specs that may not be listed in all manuals
Courtesy of chirico site
http://chircoestore.com/wordpress/?page_id=23
Torque Specifications for type 1 – 3
Type 1 – 3
Part —- ft-lb — size (dia x pitch)
Connecting rod nut – 24 – m 9×1
Connecting rod capscrew – 32 – m 9×1
Crankcase nut – 14 – m 8
Crankcase nut – 25 – m 12×1.5
Cylinder head nut 8mm – 18 – m 8
Cylinder head nut 10mm – 23 – m 10
Rockershaft nut – 18 – m 8
Heat Exchanger at head – 14 – m 8
Muffler Clamp bolts – 7 – m 6
Intake manifold nut – 14 – m 8
Preheat-flange bolt – 7 – m 6
Oil Pump nut – 14 – m 8
Oil Pump nut – 9 – m 6
Oil Drain plug – 25 – m 14×1.5
Oil Strainer nut – 5 – m 6
Oil cooler nut – 5 – m 6
Oil filler gland nut – 40
Flywheel Gland nut – 235 – m 28×1.5
Clutch bolt – 18 – m 8×1.5
Sparkplug – 25 – m 14×1.25
Engine to trans nut – 22 – m 10
Crossmember bolt – 18 – m 8
Crossmember bolt – 29 – m 10
Generator pulley nut – 43 – m 12×1.5
Fan nut – 43 – m 12×1.5
Crankshaft pulley nut – 32 – m 20×1.5
Crossmember to body – 18 – m 8
Fan/Crankshaft pulley – 94-108 – m 20×1.5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
interested in engine displacement?
http://www.msgulfcoastvwclub.org/TechPages/Tech6.html
Engine threads
Linear Mode
