Cut-Weld-Drive Forums

Go Back   Cut-Weld-Drive Forums > The VolksRodders Forum > The Cutting Board

The Cutting Board Cut... Weld... DRIVE.


User Information
Your Avatar

Stuff to check out...

Cool stuff you NEED!

Forum Stats
Members: 17,471
Threads: 32,236
Posts: 544,719
Total Online: 478

Newest Member: dconrads

Latest Threads
- by yimbo
- by JiI

 
Reply
 
Thread Tools Display Modes
Old July 17th, 2011, 12:21 PM   #1
Old No.7
Forum Member
 
Old No.7's Avatar
 
Join Date: Jun 2011
Location: Ireland
Posts: 68
Member Photo Albums
Default narrowing beam

Quick question for those with a bit of knowlege on narrowing front beams.Ive already removed the rotten shock towers and have it ready for some new end plates/towers,and looks like it already has adjusters welded in so am wondering can it be narrowed from each end or do I have to cut a section from the center.Am thinking seen as its already got the adjuster its probably more trouble than its worth cutting 2 pieces from either side of the adjuster,if I can loose a bit off each end would make it a whole lot easier.
One other quicky,lotta guys in the uk seem to run mini rear shocks up front on lowered beams,prefere the look of coil over myself,are motorcycle shocks a yesno.Have seen one or two posts saying they are too stiff but thought i might as well ask while im at it:)
Old No.7 is offline   Reply With Quote
Old July 17th, 2011, 12:48 PM   #2
Daddy o's 67
Forum Member
 
Join Date: Aug 2008
Location: Nothern Virginia
Posts: 565
Default Re: narrowing beam

On a ball joint beam the lower tube is stepped larger on the ends. You'll have to find tubing of the same inside dimension and weld that to the end if you shorten it from the ends.

See Bulldogs lastest post. He has some photos of his beam and you'll see what I'm talking about.

Have no imput regarding shocks.
Daddy o's 67 is offline   Reply With Quote
Old July 17th, 2011, 03:17 PM   #3
Jon
Forum Member
 
Jon's Avatar
 
Join Date: Dec 2002
Location: Behind you, Breathing heavy on your neck.
Posts: 6,293
Default Re: narrowing beam

To narrow a BJ beam you will need to cut out the center of the beam and put the adjusters back in. So for a 4" narrow job you would take 2" off either side of the adjuster or 6" total out of center. The adjusters are 2" wide. Once thats done the Brackets need to be moved outwards 2". so if you go wider or narrower then that do the appopriate math.

This will give you only 2 welds were the adjusters are, just like it would be stock width with adjusters. Your trailing arms will work just fine as well.

There have been people who did them by cutting to outside edge of the brackets and weld them back on, but I would not trust the durability or safety of this method.
Jon is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 07:21 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright 2002 - 2013 Three Pugs Design - Cut Weld Drive Forums