I started with a body I got from a friend and started fabing up a chassis that will use an Audi A4 five speed trans and a Scirroco 16 valve 1.8. It will be Pushing From The Middle (PFM). The front suspension is Mustang II type with stock spindles and tubular A arms. The back will be S-10 4x4 front spindles and bearing hubs with custom made upper and lower A arms. Well here's what I have so far.
Last edited by PJLOval; March 26th, 2015 at 10:54 PM.
Pushing From the Middle
Threaded Mode