Cut-Weld-Drive Forums

Go Back   Cut-Weld-Drive Forums > The VolksRodders Forum > The Tech Bin

The Tech Bin An ARCHIVE of helpful and informative tech posts...


User Information
Your Avatar

Stuff to check out...

Cool stuff you NEED!

Forum Stats
Members: 17,471
Threads: 32,236
Posts: 544,719
Total Online: 524

Newest Member: dconrads

Latest Threads
- by yimbo
- by JiI

 
Reply
 
Thread Tools Display Modes
Old September 17th, 2010, 02:21 PM   #1
andk5591
Forum Member
 
andk5591's Avatar
 
Join Date: Nov 2008
Location: State College PA
Posts: 162
Member Photo Albums
Default How to Rotary door handle w VW latch

If you want to use something like an old Ford door handle or any that rotate and have a shaft running though, but would like to use stock VW latch, I just finished it and it works.

I used early 30's Ford exterior handles
outside handle.jpg

Initially I was doing something real simple with a threaded rod and heim joints at each end.
old door latch.jpg

I got rid of the parts of the stock VW latch that I didnt need, but don't forget that you need to also open it from inside - I screwed one up and took too many pieces out. I also used an early style interior handle was easy to adapt (added 1/2" to the tab that connects to the rod). This initial design worked fine in mock up until I installed the door and closed it - The solid link forced the outside handle up when I closed the door. Not acceptable, plus I needed a little more spring to keep the exterior latch in a horizontal position. Time to rethink.

This is what I came up with.
new door latch.jpg

Used a cut down BMW serpentine belt to provide a flexible link (BMW because my buddy had one in his trash can) - anything reasonably strong a flexible will work. I almost used a dog leash. I made an aluminum bracket that I pop riveted to the belt and ran the threaded rod from the heim joint to it. This gives me adjustment if I need it. At the handle, its just an aluminum block rounded on the backside so the belt runs smoothly over it and I screwed the belt to the block. I made a coil spring from a throttle return spring and an aluminum angle to act as a stop so you cant turn the exterior handle the wrong way. Cheap, relatively easy and it works like a dream.

One more thing - if you look at the VW latch, you'll see a 1/4 20 bolt near the bottom of the pic. This acts as a stop for part of the mechanism. Without it, the one arm slides over a bump that held a part of the latch that I removed, and it can stick.
__________________
[SIGPIC][/SIGPIC], 61 Cal look, "stock" 65 Bug, 69 VW woodie, 70s vintage Manx clone, 73 bug based hearse project, 67 "T" project and a 66 with probable Suby transplant.

Last edited by andk5591; September 17th, 2010 at 04:09 PM.
andk5591 is offline   Reply With Quote
Old September 17th, 2010, 02:39 PM   #2
purplemyth
moody witch
 
purplemyth's Avatar
 
Join Date: Aug 2005
Location: central ga.
Posts: 12,152
Member Photo Albums
Default Re: How to Rotary door handle w VW latch

That looks great !
Will tech bin this later :)
__________________
1,2,.............. .
Like it, Click it, support it.
Quote:
Originally Posted by fishguts
My attraction to volksrods is that these are bottom-feeders where things are still real ... people scraping together parts, doing their own work and often on a tight budget. Real hot rodding is still alive here.
purplemyth is online now   Reply With Quote
Old September 17th, 2010, 03:49 PM   #3
XISLED
Forum Member
 
XISLED's Avatar
 
Join Date: Nov 2006
Location: Manteca Ca
Posts: 324
Member Photo Albums
Default Re: How to Rotary door handle w VW latch

great injun new ity


now if i could only figure out how to spell em all together
__________________
[SIGPIC][/SIGPIC]
I never knew i looked so good until i was diagnosed with ms.
XISLED is offline   Reply With Quote
Old September 17th, 2010, 04:11 PM   #4
andk5591
Forum Member
 
andk5591's Avatar
 
Join Date: Nov 2008
Location: State College PA
Posts: 162
Member Photo Albums
Default Re: How to Rotary door handle w VW latch

Thanks - I was suprised something like this wasn't posted before - I had searched before I did it and couldn't find any. I hope someone can benefit from it.
__________________
[SIGPIC][/SIGPIC], 61 Cal look, "stock" 65 Bug, 69 VW woodie, 70s vintage Manx clone, 73 bug based hearse project, 67 "T" project and a 66 with probable Suby transplant.
andk5591 is offline   Reply With Quote
Old July 19th, 2014, 09:26 PM   #5
Metal Twister
Forum Member
 
Metal Twister's Avatar
 
Join Date: May 2008
Location: So Cal Diego
Posts: 209
Member Photo Albums
Default Re: How to Rotary door handle w VW latch

Old post but it just saved me a ton of thinking... Thanks for the post!
__________________



"It
has been my observation that most people get ahead during the time that others waste”

- Henry Ford-
Metal Twister is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 09:48 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ALL text, images, graphics and content herein are Copyright ©2002 - 2013 Three Pugs Design - Cut Weld Drive Forums